Overview

The JISKOOT IsoFraction LNG Sampling System comprises a gas sampling system with an integrated vaporization, stabilization and control system to ensure control of the phase change of the LNG to gas with minimal lag. Once LNG has been vaporized it is maintained above the dew point of the component fractions. It then flows through a conventional gas sampler where gas samples are extracted into a fixed pressure (variable volume piston) sample collection receiver (CPC).

The LNG sampling system will normally employ three gas samplers tied into a single process loop to allow three independent but comparable samples to be taken. In addition, provision is made to allow the extraction of fixed volume samples to conventional 500ml receivers at key intervals (25/50/75/100 %) of the batch. These are spot samples and require the vessels to be purged to ensure representivity of a specific point in the batch.

This LNG sampling process provides improvements over conventional methods due to the high volume of gas flowing through the system which ensures representivity of the gas both sampled, and fed to a GC.

3 samples are taken and held in the Constant Pressure Sample Receivers. The use of fixed pressure receivers allows minimal atmospheric or cross batch contamination and a large number of small samples to maximize batch representivity.

Product resources

Manuals & Support

JISKOOT Hydraulic Power Pack HPU UK version

Manual

JISKOOT Hydraulic Power Pack USA

Manual

Marketing collateral

JISKOOT IsoFaction LNG vaporizer and sampling system

Product datasheet

JISKOOT JetLine pipeline mixing system Product Sheet

Product datasheet

Related

Related products

Calculation tools

Application solutions

For more information please contact us

Your details
*required
Areas of interest (tick all that apply)
Please indicate your region
Enter security code:
 Security code