CALDON LEFM 280Ci Ultrasonic flowmeter

Overview

The CALDON LEFM 280Ci ultrasonic flowmeter can be used on crude oils and refined products in single- or multi-product pipelines. For maximum performance it is preferred to operate at Reynolds numbers larger than 10,000. For application with lower Reynolds numbers please contact our specialists for a review of your application (see also CALDON LEFM 280CiRN ultrasonic flowmeter). 

The eight chordal path design of our CALDON LEFM 280Ci flowmeter resists installation errors better than any other ultrasonic flowmeters. The cross-plane acoustic paths make the meter immune to the effects of swirl and eliminate the need for an upstream flow conditioner. The effects of swirl on the two paths in each individual chordal plane are equal and opposite to each other, any effects from swirl are cancelled out. 

This flow meter's design also minimizes the requirement for upstream/downstream pipe runs. The elimination of a flow conditioner and the need for shorter lengths of upstream pipe reduce the installed cost for the CALDON LEFM 280Ci flowmeter. This also results in lower overall pressure loss, which equates to annual savings in pumping costs.

Specifications

Standard Features

  • Insensitivity to swirl
  • Electronics can be integrally or remote mounted
  • Sizes available in 4" to 40"
  • ±0.10% linearity for each measurement over the nominal flow range
  • OIML R117-1 Edition 2019 (E); Accuracy Class 0.3

Product resources

Manuals & Support

CALDON LEFM 200 Modbus Manual

Manual

CALDON LEFM 2xxCi ultrasonic flowmeters with G3 transmitters Manual

Manual

CALDON LEFM G3 Transmitter Modbus Manual

Manual

Marketing collateral

CALDON LEFM ultrasonic flowmeters for liquid applications Brochure

Brochure

Related

Related products

For more information please contact us

Your details
*required
Areas of interest (tick all that apply)
Please indicate your region